No products in the Quote.
Home Our Equipment Data Loggers Multi Channel Data Logger
The MSFM multichannel GPRS data logger is an energy efficient, reliable GRPS data logger enabling real-time information to be accessed from anywhere, at any time.
The data logger has the capacity to acquire measurements from a variety of sensors and transmit them via GPRS. Data is transmitted to Detectronic’s cloud-based data portal which is well equipped with a powerful suite of online data collection, monitoring, analysis and reporting tools.
GPRS MODEM QUAD BAND
900MHz, 1800 MHz / 850MHz, 1900MHz – integral antenna.
Crystal controlled calendar clock with leap year adjustment.
Accuracy: 100 seconds per month maximum error over operating temperature range.
Synchronisation: option to synchronise clock to GSM network for greater accuracy.
Logging interval: programmable between 1 second and 1 hour.
Data storage: rotating store or store until full.
Operating ambient temperature: -20°C to +50°C.
Protection classification: IP68
(submersion at 1m depth for > 24 hours).
LOCAL SERIAL PORT
Full duplex, asynchronous.
Data rate: 1200, 2400, 4800, 9600 bps diagnostics.
Internally powered by a user-replaceable lithium cell (internal back up cell maintains logging and local communications when main battery pack is discharged).
Typical battery life: >5 years, depending on mode of use.
High/low threshold alarms with option to update data on alarm and more frequently thereafter.
Optional profile alarms can be set when sufficient historical data is available.
Military specification, compatible with MIL-C-26482.
Direct cable or optional 8-channel interface for simpler and easier connection.
NUMBER OF CHANNELS
Voltage, analogue, event, state, count, frequency (independently selected on each channel).
Protected against reverse connection and over voltage.
Range 0 to 2.5 volts, 0.0002 volt accuracy and resolution.
Range 0-20 mA or 4-20 mA, 0.002 mA accuracy and resolution.
Switch closure or logic pulse, date and time of event stored.
Resolution 1 second or 10 seconds.
Switch closure or logic state. On state change, date, time and new state are stored. Resolution 1 second or 10 seconds.
Switch closures or logic pulses, maximum rate Channel 1, 4, 5, 6, 7, 8 = 10 per second, Channel 2 and 3 = 45 per second (counted over and recorded at preset intervals). 16,000 maximum per logging interval.
Switch closures or logic pulses, maximum frequency 16 kHz, programmable sampling period of 1 to 250 seconds, independent of recording rate. Resolution 0.01% maximum.
For transducer power control and alarm signalling (0 and 3 volt levels,
Active low, 100k output impedance).
1 FIXED OUTPUT
For ‘open collector’ signal bias (3 volts, 33k output impedance).
The data is read and recorded by the MSFM Lite at predetermined logging intervals set by the user.
Logged data is then transmitted via it’s 2G/3G/LTE-M1/NB-IoT capable modem (at user-selectable intervals (typically hourly, daily, weekly or monthly). Data can be transmitted direct to a host computer or viewed on Detectronics range of secure websites.
The MSFM GRPS 2 channel datalogger is a precision GPRS 2-channel system that accurately monitors your incoming clean/mains water consumption. It provides industry standard remote monitoring and has a specially designed aerial to maximise the signal in underground locations.
LIDoTT Smart is an intrinsically safe, compact datalogger with 4G NB-IoT modem, internal antenna and up to 7 years battery life.