No products in the Quote.
Our Equipment Water Quality Monitors pH Probe
The pH5 electrode has a double-junction reference to prevent contamination of the reference from sample components.
This design gives the electrode a longer life compared to ordinary electrodes (up to 3 yrs). The electrode also has a hemi-shaped glass measuring surface which is more durable than the traditional bulb-shaped glass.
Sitting at the top end of the market place, the ORAKEL pH probe has a longer life and lower maintenance requirements. Typically it only needs calibrating once every two or three months, making it a very cost effective solution.
Our range of ORAKEL pH probe can measure the online pH of any aqueous solution. They are combination glass electrodes with integral reference and automatic temperature compensation which use no reagents, are extremely stable and have reduced maintenance and lower whole-life costs.
The pH5 electrode has a double-junction reference to prevent contamination of the reference from sample components. This design gives the electrode a longer life compared to ordinary electrodes (up to 3 yrs). The electrode also has a hemi-shaped glass measuring surface which is more durable than the traditional bulb-shaped glass. Sitting at the top end of the market place, the ORAKEL pH probe has a longer life and lower maintenance requirements. Typically it only needs calibrating once every two or three months, making it a very cost effective solution.
pH5 and pH6 are particularly sensitive to difficult applications such as very low ionic strength waters or high temperature applications. The pH1-3 models in the range are less expensive, and have more traditional combination electrodes.
Anywhere you have a requirement to measure pH is a suitable application for the ORAKEL pH probe. One area the sensors excel is in the measurement of pH in very low conductivity or ultra clean water. They are also particularly suited to working in sites where reliability and ease of use are most important.
Typical applications include:
The ORAKEL PH sensors can be installed in a variety of auxiliary flow cells and self-cleaning devices.
The ORAKEL can come equipped to automatically clean itself at user defined intervals with all the benefits of no operator intervention for 6 months. The Autoflush is particularly useful in food preparation, pulp and paper, and many applications where there is likely to be a build up of solids in the sample. Autoflush is available for at line, and in line versions including dip and screw in autoclean pipe version.
Key features and product specification
The ORAKEL Suspended Solids senor has a large dynamic range, which eliminates the need for a “zero” and also eliminates the effect of background light.
For multiple measuring ranges, the suspended solids sensor can monitor turbidity and suspended solids from 2 NTU (1mg/l) to 8%* solids.
The ORAKEL COD/TOC Sensor uses UV254 light as a surrogate measurement for detecting organics in water.
It is designed in modular form so that it can be integrated with other sensors, such as pH, turbidity and dissolved oxygen, to provide all the tools needed for either a stand-alone UV254 analyser or as part of an effluent discharge monitoring system.
The ORAKEL COD/TOC Sensor provides online continuous organics monitoring utilising a 254nm ultraviolet light source.
Water can have a positive or negative Oxidation Reduction Potential (ORP) and it is measured in volts. ORP is a way to measure water’s ability to accept or release electrons during a chemical reaction. Understanding the ORP value helps determine the quality of the water and thereby helps operators decide what water treatment processes may be required. The more positive the ORP value, the greater the tendency the water has to oxidise (gain electrons from) organisms or other material in the water, thereby killing or destroying them.
The ORAKEL range of Residual Chlorine Analysers, Residual Chlorine Controllers and Residual Chlorine Monitors are membrane devices which are insensitive to changing pH, use no reagents, are extremely stable, and have reduced maintenance and reduced whole life costs.
The membraned amperometric chlorine sensors are enhanced with a third, reference electrode which eliminates zero drift. Its unique design means that pH correction is not usually required at all, completely eliminating reagents.
The ORAKEL range of Conductivity meters also double as a Salinity meter and a TDS meter. The range measures conductivity in water from 0 to 2,000,000 µS/cm (range selectable). You can choose between a standard graphite sensor and a more sophisticated toroidal sensor, or stainless steel ‘special’ sensors for high temperature, high pressure conductivity measurement applications.
The ORAKEL System is ideal for all your water monitoring equipment needs, measuring both water flow and water quality at the same time. Created as a modular system, a wide range of water quality sensors can be added to measure various characteristics, such as pH, COD and suspended solids, for a truly bespoke and cost-effective solution.